Faraday Cage – Chicken Wire vs Aluminum Foil




Shows the performance differences between a Faraday cage crafted from chicken wire vs one made from aluminum foil. For more info on preparedness and EMP products, go to http://disasterpreparer.com.

Disclaimer: Our videos have been made available for informational, entertainment, and educational purposes only. Content should NOT be considered professional advice, engineering or otherwise. Neither Disasterpreparer LLC nor its member, Dr. Arthur Bradley, make any representation with respect to accuracy, applicability, or completeness of the content. Further, our videos are NOT intended to be a substitute for professional advice from an engineer, electrician, or any other professional. Disasterpreparer LLC and its member, Dr. Arthur Bradley, disclaim any and all liability to any party for any direct, indirect, implied, punitive, special, incidental, or other consequential damages arising directly or indirect, implied, punitive, special, incidental, or other consequential damages arising directly or indirectly from any use of video content, which is provided as is, and without warranties.

10 thoughts on “Faraday Cage – Chicken Wire vs Aluminum Foil

  • January 19, 2021 at 10:31 am
    Permalink

    *Sincere question:* what’s the best approach for dealing with EMP and or standard EM signals and radiation? 5G is coming soon – and anytime a fantastic quantity of government employed scientists start universally agreeing that “[X] is perfectly safe”: I become adversely cautious of [X].

    Reply
  • January 19, 2021 at 10:31 am
    Permalink

    Thank you for your videos. Is it enough to stick/lay a cooking aluminum foil on the ceiling of a room (say in a condo) in order to protect it (at least partially) from an harassing radiofrequency source located on the floor above it? Or does one need to erect aluminum protection shields also on the four lateral sides of the room, and perhaps also on its floor? Thank you. It would be great if you could post an example video about this.

    Reply
  • January 19, 2021 at 10:31 am
    Permalink

    Please do a video or someone help me to protect against a pad mounted transformer in my yard…how dangerous is it I can hear the electric flowing thru it…can I wrap it in foil..while that make it explode from heat? What to do?

    Reply
  • January 19, 2021 at 10:31 am
    Permalink

    Hi Dr Arthur sir,
    I saw your all videos, all are very informative for engineer’s. I would like to request plz share your email address so I can email you my queries. Thank you

    Reply
  • January 19, 2021 at 10:31 am
    Permalink

    Should have tried the shielding with a frequency sweep and different mesh shielding material.

    Reply
  • January 19, 2021 at 10:31 am
    Permalink

    Spectrum analyzer, radio frequency..very useful
    what relation would RF have to a MagPulse

    Reply
  • January 19, 2021 at 10:31 am
    Permalink

    I try and go the inexpensive but effective route.. I have a galvanized trashcan and I put things like dc-ac inverters- radios ,etc in a carboard box, then wrap the box with aluminum foil, then line the trashcan with a thick plastic trash bag then insert my items in it and put the lid on tight. I have a question, do you think a 12 volt/ 120 volt portable fridge/freezer like ENGEL , which uses a simple compressor, would be ruined by EMP ?

    Reply

Leave a Reply

Your email address will not be published. Required fields are marked *